High-quality custom cabinetry, built and installed by us
Medium and high-end kitchens, bathrooms, wardrobes, laundries and commercial joinery, manufactured in our own Tullamarine factory and fitted by our own crews. Quality is controlled at every stage, from the site measure and shop drawings through manufacture and factory checks to installation and handover.
- Measured on site and drawn in detail before anything is cut
- Built by experienced cabinet makers and checked before it leaves the factory
- Installed and handed over by crews who know how it was built
What we make
Medium and high-end custom cabinetry for homes, renovations and commercial projects across Victoria, built by experienced cabinet makers in our own factory.
Kitchens
Full custom kitchens: islands, overheads, tall pantries, appliance towers and butler's pantries, in stone, timber veneer, two-pack or laminate.
Bathrooms & vanities
Floating and floor-standing vanities, shaving cabinets, mirror units and linen towers, built for wet areas and set out around your plumbing.
Wardrobes & walk-ins
Built-in robes, walk-in dressing rooms, internal drawer banks, shelving and hanging, made to the room instead of a catalogue size.
Laundries & mudrooms
Benches over front loaders, broom cupboards, drying rails, bench-to-trough joinery and hard-wearing storage for the back of the house.
Living & study joinery
Entertainment units, display and library shelving, home offices, window seats, bars and concealed storage integrated into the architecture.
Commercial joinery
Offices, schools, medical, hospitality and retail. Reception desks, boardroom joinery, tea points, locker banks and display units.
How a project runs
Same process every time, and quality is checked at each stage rather than inspected at the end. You always know what happens next and what you're approving.
Your drawings & quote
Send us the plans and finishes schedule from your architect, designer or draftsman. We quote straight off those drawings, work through them with you, and flag anything that won't build the way it's drawn.
On-site measure
We measure the space ourselves and check services, appliance specs, floor levels and whether the walls are square, before anything gets set out around them. Accurate measuring is where install quality is won or lost.
Shop drawings & sign-off
Detailed shop drawings for you to approve, with the price locked in against the measured site. Cabinet sizes, fillers, scribes and cut-outs are all marked. Nothing goes on the saw until they're signed off.
Materials & hardware
Substrates, finishes, hinges, runners and drawer systems selected to suit the job and how hard it will be used, rather than defaulting to the cheapest option that fits the spec.
Manufacture & factory checks
Built in our Tullamarine factory by experienced cabinet makers, then checked against the approved drawings before it is loaded. Because our own crews fit it, it gets made the way it needs to go in.
Install & handover
We deliver and fit it ourselves, with careful set-out, alignment, scribing and clean finishing. We check the finished job over and walk it through with you before we leave, and we come back if something needs attention.
Materials & finishes
We work across the full range of cabinetry finishes and match to your project rather than pushing one system. Hardware is chosen for how hard the joinery will be used, because that is usually what decides whether a kitchen still feels well made in ten years. Send us the samples or finishes schedule from your designer and we build to it.
Recent projects
Tap any project to see the full set of photos.
Middle Park Residence
Residential · 14 photos
Middle Park Kitchen & Joinery
Residential · 10 photos
Gather House, St Kilda West
Residential · 10 photos
Wilmoth Project
Residential · 5 photos
Glen Iris Kitchen
Residential · 5 photos
Taylors Lakes Kitchen
Residential · 6 photos
Selected Kitchens
Residential · 8 photos
Common questions
If yours isn't here, get in touch.
Most projects come to us with architectural or joinery drawings already prepared. We review those drawings, develop detailed shop drawings for your approval and flag anything that needs resolving before manufacture begins. If you are still at the concept stage, contact us and we can recommend designers or support with the design.
Yes, our own crews fit everything we build. That means one contract, one point of contact, and no argument on site about whether a problem is a manufacturing issue or an install issue.
Yes. Once we've measured and you've approved the drawings, you get a fixed price for manufacture and install. Site adjustments within that scope don't become variations.
Both. Vanities, shaving cabinets, laundry joinery, mudrooms, wardrobes, living and study joinery, the whole house if you want it done in one go.
We build the cabinetry around your appliances and fit them into the joinery. The electrical, plumbing and gas connections are done by licensed trades. We coordinate with yours, or arrange them separately if you'd rather we handled it. Same with feature lighting: we build and wire-run the joinery for it, and a licensed electrician makes the final connection.
Yes: offices, medical, hospitality and retail, including reception joinery, boardrooms, tea points and locker banks.
It depends on scope and finishes, so we give you a program alongside the quote rather than a generic lead time.
We're based in Tullamarine and cover jobs all over Victoria.
Yes, public liability insurance and workers compensation, with white cards and SWMS as standard on site.
Call us and we'll sort it. We come back and rectify rather than leaving you to chase someone.
Planning a kitchen, bathroom or full fitout?
Send through plans or just tell us about the space and we'll take it from there.